Finally got round to putting the Teamgee H3 unit on to the 121c Aileron deck and boy does it look good.
I really like this 31″carbon-fiber deck (it is one of my favorites), which has a nice concave top and big aggressive kick-tail. It feels more like a rigid downhill board but still carves really nicely.
Although the H3 unit is slow uphills (single low power motor) it is still surprisingly fun on flat ground carving under power. This is the same deck that is being used on the new Arc Board Aileron, with the Arc Board fusion drive; which should make for one hell of a board – I am looking forward to testing one.
Fitting the H3 was easy, as it is meant to be. I used two half-risers (a riser bad cut in half) to cover a gap between the rear of the motor unit and the foam on the front of the unit.
I have been enjoying the H3 on the 32″ Hecs deck, more than I expected and, apart from testing the Boosted with the new big Boa wheels (see the previous post), it is all I have used in the last month.
What makes it fun is the combination of short deck, silent easy push hub-motor, and smooth power controls. The cheap H3 remote is a little too sensitive for my liking, especially on braking, but liveable with. In the end, I picked up another H6 remote and paired that with the H3. The H6 remote is a significant improvement and, given it is relatively inexpensive I highly recommend upgrading to it. The wheel control on the H6 is just better and more progressive than the thumb lever on the H6; breaking is just more controlled and IMO safer.
I love the BB with its flexy deck, belt drive and soft wheels for going anywhere, and not worrying too much about bad roads and pavements, but for quick hooning around on nice roads and pavements, nipping to the shop, the short deck and H3 combination is great and always makes me smile as I find myself carving like salmon heading upstream, way more than I can do on the BB.
Before the good points, lets get the negatives out of the way:
The H3 remote control is basic and cheap (get the H6 remote) and has a potentially dangerous forward/reverse button prominent on the remote (the H6 is less prominent and less prone to accidental pressing).
The single motor top-speed is not powerful enough, it accelerates OK and tops out around 15mpg, but the big issue is that it really struggles to get up steep hills and cannot even sustain its average speed on moderate ones.
The good points:
It is inexpensive.
It is well made (for the cost) and uses the well-made trucks from the H6.
The power control is smooth and progressive; an easy e-skate to get confident on quickly. No disconnects or connection issues.
It is easy to fit (see link).
There is minimal resistance (this is just a single hub-motor), so pushing off, using it like a conventional longboard is easy, you can even pump it if you want.
In summary: easy to fit, just works, but struggles with hills.
The range I have been getting from the 2200mah battery is just over 6 miles when out easy cruising and occasionally hitting the 15mph top speed (for the record I am 185lb/84kg). Charging time from empty is roughly 1.5 hours.
Like the H6, the H3 remote has a hard-switch two-setting speed limiter which works well with my 8-year-old and restricting his top speed.
Regarding the price, my unit is an advanced one (paid for with my own money) but Teamgee has not put this up for general sale, so I don’t know the official cost. If it was me, looking at the alternatives, I would happily pay $250-300 for this unit.
Final word, I have ordered an exotic 31″ 121c Aileron carbon-fiber deck (19″/48cm wheelbase) for it to live on longer term. If Teamgee bring out a more powerful drive version, I will get it.
Nice one Teamgee.
(just redesign your remote and that forward/reverse button and stick a more powerful motor on it).