I have been looking, purely out of interest, at various mechanical braking options for conventional longboards.
Most people will either just run-off the board if things are getting all scary, or footbrake if not going too fast. A few, with more experience and practice, can slide a board, but that still needs space and safe situation to do so. The concept here is of having another mechanical option.
In summary, there seems to be three different types of solutions:
1. Braking on the wheel – Mingo Skateboard ‘The Frog’
Mingo Skateboard’s ‘Frog’ device is attached to the exposed truck (drop-through deck) and foot pressure forces brake levers on to the wheels. The reviews I read were not that complimentary, including it scaring the wheels – a shame, and I might still try it, as it does not require any drilling into the board.
2. Braking on the road – Pogo, Handmade & Boolah Boards
German company Pogo, Korean Handmade and US Boolah Boards use the same simple mechanism of the foot forcing down a brake bad against the road. Some require a hole drilling for the foot pad and others use the space some trucks have with drop-through deck mounting. All require the arm with the brake pad attached to be attached (screwed or bolted) to the deck.
3. Braking on the truck – Brakeboards
Australian Brakeboard use a daily sophisticated truck based mechanism a little bit like a bike disk-brake. Mechanical more complex than the others, but can be used without screwing or drilling any holes into the deck. Shipping and tax are sadly incurred getting it to the UK, plus the only options seem to be either buying that Rat Board, with 150mm trucks, or their custom 180mm trucks at $500; add in tax and shipping and the latter is a very expensive solution.
(As ever, let me know if I have missed any other solutions).
To start with, I thought I would try with a braking on the road solution and ordered the Korean company Handmade’s Slide Brake (which seems to be just sold on Amazon). It is quite a simple solution, to work with one of our drop-throughs (probably the ZenitAB, but might use the Kaliber Affe) but it does require me to drill a hole for the arm screw/bolt… which will hurt!
I will do another update once installed and tested.